Figure 3-71 Event Status Screen; Table 3-13 Event Status Information - Honeywell HRSD40F User Manual

4.
Viewing Events and Storage
The Event Status screen displays the status of the DVR's systems and inputs. Events
are highlighted, and related channels or events flicker for five seconds when detected.
Viewing Event Status
Highlight Event Status in the Event menu and press
appears.
102
Save your System Event changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
Figure 3-71
Table 3-13 Event Status Information
Alarm-In, Motion,
Video Loss and
Text-In
Check Alarm-In and
Check Recording
Panic Record
Event Status Screen
Action
Highlights when the DVR detects an event based on
the settings you made in the Alarm-In, Motion
Detection, and Text-In setup screen on the Event
menu.
Highlights when the DVR detects an event based on
the settings you made in the System Event setup
screen on the Event menu.
Highlights while the DVR is in the panic recording
mode.
HRSD40F DVR User Guide
. The Event Status screen
. Select