Table 4-3 Record Table Search Buttons - Honeywell HRSD40F User Manual

120
Note If the DVR's time and date have been reset to a time that is earlier
than some recorded video, it is possible for the DVR to have
more than one video stream in the same time range.
In this case, the overlapping time range in the record table will be
separated by a yellow vertical line. The recorded data in the time
range located after the yellow vertical line is the latest.
Note If the DVR has images recorded in more than one recording
mode in the same time range, the recording status bar displays
recording information in the following priority order and in
different colors: Panic (red), Pre-Event (yellow), Event (purple),
Time (blue).
Table 4-3 Record Table Search Buttons
Button
Standard View
Expanded View
Zoom In
Zoom Out
Note To move to earlier or later times that are not shown in the current
record table screen, select the arrows located at the end of the
timeline by using the arrow buttons on the front panel or remote
control.
Search Menu
Calendar
Search Menu
HRSD40F DVR User Guide
Function
Click these buttons to switch to the other view.
Standard View displays combined recording
information for all currently displayed camera
channels.
Expanded View displays the recording
information of each currently displayed camera
channel.
Select to view an 8-hour range (with
1-minute intervals).
Select to view a 24-hour range (with
3-minute intervals).
Click to display the Search menu.
Click to display the Calendar search menu.
Playback controls
Click to exit the Record Table search window.