Table of Contents
Advertisement
22. Mechanical Loading
23. Circuit Overloading
24. Reliable Earthing (Grounding)
Document 800-03097 Rev C
03/09
Mounting of the equipment in the rack should be such that a hazardous condition
is not caused by uneven mechanical loading.
Consideration should be given to connection of the equipment to supply circuit
and the effect that overloading of circuits might have on over-current protection
and supply wiring. Appropriate consideration of equipment nameplate ratings
should be used when addressing this concern.
Reliable grounding of rack mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit (for example, use of power strips).
21
Advertisement
Table of Contents
