Honeywell HRSD40F User Manual page 35

Four-channel digital video recorder
Table of Contents

Advertisement

Configuration
#
Control
5
Arrow Buttons
6
ENTER/PAUSE
Button
7
PANIC Button
Note
When the DVR does not detect a VGA monitor automatically, pressing and holding
five seconds or longer switches the video output to VGA out manually.
8
PTZ/ZOOM Button
Note
When the DVR is in Zoom mode, a rectangle displays on the screen. The rectangle indicates
the area that will be enlarged. You can move the rectangle around using the Arrow buttons.
Pressing
Document 800-03097 Rev C
03/09
Table 3-1
Function
Use the arrows to navigate through menus and GUI. You can also
use them to change numbers by highlighting a number in the menu
and using the Up and Down arrow buttons to increase or decrease
the number's value.
You can also use them to control Pan and Tilt in the PTZ mode.
In playback mode, press
Press
. The screen displays
Press
toggle the playback speed from
displays
In pause mode, the Up arrow selects the next image, and the Down
arrow selects the previous image.
Press
an entry that you have made during system setup.
In Live Monitoring mode, press
The screen displays
monitoring mode.
Press
channels. When the DVR is in the Panic recording mode,
displays on each camera screen.
Press
In Live Monitoring mode, press
Pan/Tilt/Zoom screen, where you can control properly configured
cameras. Press
In Zoom mode, press
monitoring mode.
If a PTZ device is not installed or if no PTZ camera has been set up
in Camera setup, you can press
zoom mode.
In PTZ mode, press the Arrow buttons or
configured cameras.
enlarges the area in the rectangle.
DVR Front Panel Controls
to play video backward at high speed.
again to toggle the playback speed from
to play video forward at high speed. Press
,
, and
(Enter/Pause) to select a highlighted item or complete
. Press
(Panic) to activate panic recording of all camera
again to release the panic recording.
again to exit PTZ mode and enter Zoom mode.
to exit zoom mode and return to live
,
, and
respectively.
,
, and
respectively.
to freeze the current live screen.
again to return to the live
(PTZ/Zoom) to open the
to directly enter the digital
to control properly
,
, and
again to
. The screen
for
35

Advertisement

Table of Contents
loading

Table of Contents