Hnb-Cs Network Configuration - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

HNB-GW Service Configuration Procedures
ps-network <ps_network_name> -noconfirm
associate sccp-network <sccp_network_id>
associate gtpu-service <gtpu_ps_svc_name> context <dest_ctxt_name>
sgsn point-code <sgsn_point_code>
no sgsn deadtime
map core-network-id cn_id point-code <sgsn_point_code>
end
Notes:
 <
ps_network_name
 <
sgsn_point_code
through HNB-GW.
 <
gtpu_svc_name
over IuPS interface for packet switched traffic towards PS-CN.

HNB-CS Network Configuration

Use the following example to configure the circuit switched network parameters to be associated with HNB-GW service
on system:
configure
cs-network <cs_network_name> -noconfirm
associate rtp-pool <cs_ip_pool_name> context <dest_ctxt_name>
associate sccp-network <sccp_network_id>
msc point-code <msc_point_code>
no msc deadtime
map core-network-id cn_id point-code <msc_point_code>
end
Notes:
 <
cs_network_name
session.
 <
msc_point_code
through HNB-GW.
 <
cs_ip_pool_name
allocate RTP end point address in this CS network over IuCS interface.
OL-25069-03
> is name of the packet switched network to be associated with HNB-GW for IuPS session.
> is address of the SGSN in SS7 point code format to be used for packet switched traffic
> is name of the GTP-U service configured in <
> is name of the HNB-CS Network service to be associated with HNB-GW for IuCS
> is address of the MSC in SS7 point code format to be used for circuit switched call
> is name of the IP pool configured in destination context named <
gtpu_ctxt_name
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
HNB-GW Service Configuration ▀
> to provide GTP-U tunnel
> to
dest_ctxt_name
79