Cisco ASR 5000 Series 3G Home NodeB Administration Manual page 66

▀ Information Required to Configure the System as an HNB-GW
Required Information Description
Peer Server Process Specifies the peer server process instance in peer server id. The instance must be an integer from 1 to 4.
(PSP) instance A PSP instance configuration need to define:
Signaling Connection Control Part (SCCP) Network Instance Configuration
SCCP Network An identification for SCCP network instance and must be an integer between 1 and 12 by which the SCCP
Instance and variant network instance will be identified and configured.
A variant can be configured for the SS7 routing domain. some of them are:
SS7 Routing An identification for SS7 routing domain and must be an integer between 1 and 12 by which the SS7
Domain id and routing domain will be identified and associated with this SCCP network instance.
variant
Destination point Specifies the destination point code (DPC) in SS7 address format along with SSN and SCCP version.
code
Circuit Switched Network Configuration
Circuit Switched An identification string between 1 and 63 characters (alpha and/or numeric) by which the Circuit Switched
Network instance Core Networks instance which needs to be associated with HNB Radio Network PLMN id.
An HNB-CS network instance is required for Femto UMTS access over IuCS/Iu-Flex interface between
HNB-GW service and CS networks elements; i.e. MSC/VLR.
Multiple CS network instances (maximum 8) can be configured on a system.
SCCP Network id Specifies a predefined Signaling Connection Control Part (SCCP) network id in at system level in Global
configuration mode to be associated with the CS network instance in order to route the messages towards
MSC/VLR over IuCS interface.
RTP IP Pool name An identification string from 1 to 63 characters (alpha and/or numeric) by which the RTP pool is
configured and associated with CS network configuration to allocate RTP IP address ot session managers
in HNB-GW service over IuCS towards CS core networks.
Default MSC point Specifies the default MSC point-code with HNB-CS network instance. This MSC point code (SS7 address)
code is used when HNB-GW is to be connected to only one MSC with in a CS network or as default MSC for
all HNBs connected through specific HNB-CS network instance.
Packet Switched Network Configuration
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
66

PSP mode: client or server

Exchange mode: double ended or single ended

End point address in SS7 address format

Association of ASP instance

ansi: American National Standards Institute (U.S.A.)

china: Chinese standard

itu: International Telecommunication Union (ITU-T) Telecommunication Standardization Sector

ntt: Japanese standard

ttc: Japanese standard
HNB-GW Service Configuration Procedures
OL-25069-03