Hnb-Gw Service Configuration - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

▀ HNB-GW Service Configuration

HNB-GW Service Configuration
Use the following example to configure the HNB-GW service on system in source context to provide access to HNBs
towards core networks:
configure
sgsn-global
aggregate-ipc-msg { linkmgr | sessmgr } { flush-frequency frequency | num-msgs
number_msgs }
exit
context <vpn_ctxt_name>
hnbgw-service <hnbgw_svc_name> -noconfirm
sctp bind address <ip_address>
sctp bind port <sctp_port>
ranap reset hnbgw-initiated
ranap reset max-retransmissions <max_retrans>
ranap reset guard-timeout <timeout_dur>
rtp mux
rtcp report interval <dur>
associate rtp-pool <ip_pool_name>
associate gtpu-service <gtpu_iuh_svc_name>
no handin cn-domain cs
ip iuh-qos-dscp protocol { sctp | udp } payload { all | gtpu | rtcp | rtp }
<dscp_marking>
ip iu-qos-dscp protocol { sctp | udp } payload { all | gtpu | rtcp | rtp }
<dscp_marking>
radio-network-plmn mcc <mcc> mnc <mnc_code>
rnc-id <rnc_id>
associate ps-network <ps_network_name>
associate cs-network <cs_network_name>
end
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
80
HNB-GW Service Configuration Procedures
OL-25069-03