▀ HNB GW Service Configuration
HNB-CS Network Configuration
Use the following example to configure the circuit switched network parameters to be associated with HNB-GW service
on system:
Notes:
<
session.
<
through HNB-GW.
<
to allocate RTP end point address in this CS network over IuCS interface.
HNB-GW Service Configuration
Use the following example to configure the HNB-GW service on system in source context to provide access to HNBs
towards core networks:
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
> is name of the packet switched network to be associated with HNB-GW for CS
> is address of the MSC in SS7 point code format to be used for circuit switched call
> is name of the IP pool configured in destination context named <
HNB-GW Service Configuration Procedures
OL-22991-01
>