Table of Contents
Advertisement
IP Security
Verifying the APN Configuration for L2TP
These instructions are used to verify the APN template configuration for L2TP.
Step 1
Verify that your APN is configured properly with L2TP by entering the following command in Exec Mode in specific
context:
show apn { all | name apn_name }
The output of this command is a concise listing of FA service parameter settings configured on the system.
OL-25069-03
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
APN Template Configuration to Support L2TP ▀
183
Advertisement
Table of Contents
