Transform Set Configuration; Configuring Transform Set; Verifying The Crypto Transform Set Configuration - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

▀ Transform Set Configuration

Transform Set Configuration
This section provides instructions for configuring transform sets on the system.
Important:
more information on commands that configure additional parameters and options, refer to the Context Configuration
Mode Commands and Crypto Transform Configuration Mode chapters in the Command Line Interface Reference.
To configure the crypto transform set for IPSec:
Step 1
Configure crypto transform set by applying the example configuration in the
Step 2
Verify your Crypto Transform Set configuration by following the steps in the
Configuration section.
Step 3 Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
System Administration Guide and the Command Line Interface Reference.

Configuring Transform Set

Use the following example to create the crypto transform set on your system:
configure
context <ctxt_name>
crypto ipsec transform-set <transform_name> ah hmac { md5-96 | none |sha1-96 } esp
hmac { { md5-96 | none | sha1-96 } { cipher {des-cbc | 3des-cbc | aes-cbc } | none }
mode { transport | tunnel }
end
Notes:
 <
ctxt_name
 <
transform_name
IPSec configuration.
 For more information on parameters, refer to the IPSec Transform Configuration Mode Commands chapter in
the Command Line Interface Reference.

Verifying the Crypto Transform Set Configuration

These instructions are used to verify the crypto transform set(s) was/were configured.
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
152
This section provides the minimum instruction set for configuring transform set on your system. For
. For additional information on how to verify and save configuration files, refer to the
> is the system context in which you wish to create and configure the crypto transform set(s).
> is the name of the crypto transform set in the current context that you want to configure for
Configuring Transform Set
Verifying the Crypto Transform Set
IP Security
section.
OL-25069-03