▀ LAC Service Configuration to Support IPSec
<
lac_svc_name
<
lns_address
<
aaa_ctxt_name
IKE S Key and S Lifetime parameters.
<
map_name
Verifying the LAC Service Configuration with IPSec
These instructions are used to verify the LAC service to support IPSec.
Step 1
Verify that your LAC service is configured properly with IPSec by entering the following command in Exec Mode in
specific context:
show lac-service nameservice_name
The output of this command is a concise listing of LAC service parameter settings configured on the system.
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
172
> is name of the LAC service for which you are configuring IPSec.
> is IP address of the LNS node to which LAC service will communicate on IPSec.
> name of the context through which the HA service accesses the HAAA server to fetch the
> is name of the preconfigured ISAKMP or a manual crypot map.
IP Security
OL-25069-03