Verifying The Fa Service Configuration With Ipsec - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

IP Security
tunnel regardless of whether or not IPSec is supported for the new subscriber sessions. Data for existing
Mobile IP sessions is unaffected.

Verifying the FA Service Configuration with IPSec

These instructions are used to verify the FA service to support IPSec.
Step 1 Verify that your FA service is configured properly with IPSec by entering the following command in Exec Mode in
specific context:
show fa-service { name service_name | all }
The output of this command is a concise listing of FA service parameter settings configured on the system.
OL-25069-03
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
FA Services Configuration to Support IPSec ▀
167