Iu-Flex Configuration; Iu-Flex Over Iucs Interface Configuration - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

▀ Iu-Flex Configuration

Iu-Flex Configuration
To configure Iu-Flex support on HNB-GW service:
Step 1
Modify the configured HNB-CS Network configuration with Iu-Flex parameters by applying the example configuration
in the Iu-Flex over IuCS Interface Configuration section.
Step 2
Modify the configured HNB-PS Network configuration with Iu-Flex parameters by applying the example configuration
in the Iu-Flex over IuPS Interface Configuration section.
Step 3 Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
System Administration Guide and the Command Line Interface Reference.

Iu-Flex over IuCS Interface Configuration

Use the following example to configure the Iu-Flex feature over IuCS interface for MSC pooling and sharing.
configure
cs-network <cs_network_name>
map idnns range <idnns_start> to <idnns_end> point-code <msc_point_code> [ backup
point-code <bkup_msc_point_code>]
map nri range <nri_start> to <nri_end> point-code <msc_point_code>
nri length <nri_value>
null-nri <null_nri_value>
offload-msc point-code <msc_point_code>
end
Notes:
 <
cs_network_name
GW service.
 <
nri_value
HNB-GW service.

offload-msc point-code
during NAS Node Selection Function (NNSF) procedure when it needs to be off-loaded while using Iu-Flex
functionality on HNB-GW node.
Important:
can be used for planned maintenance as well.
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
90
. For additional information on how to verify and save configuration files, refer to the
> is name of the HNB-CS network which is already configured and associated with HNB-
> must be an integer between 1 and 10. A zero NRI length value disables the Iu-Flex feature on
<
msc_point_code
Offload check is only for the primary point code and NOT for the backup point code. This command
> command enables the exclusion of specific primary MSC
HNB-GW Service Configuration Procedures
OL-25069-03