Verifying The Ha Service Configuration With Ipsec - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

IP Security

Verifying the HA Service Configuration with IPSec

These instructions are used to verify the HA service to support IPSec.
Step 1 Verify that your HA service is configured properly with IPSec by entering the following command in Exec Mode in
specific context:
show ha-service { name service_name | all }
The output of this command is a concise listing of HA service parameter settings configured on the system.
OL-25069-03
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
HA Service Configuration to Support IPSec ▀
169