Configuring The Atm Port; Associating Alcap Service With Hnb-Cs Network Service - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

▀ IuCS over ATM Configuration
 <
alcap_ctxt_name
 <
alcap_svc_name
HNB-GW and CS core network.
 <
ss7rd_id
 <
alcap_pointcode

Configuring the ATM Port

To configure ATM port for IuCS-over-ATM facility, apply the following example configuration:
configure
port atm <sonet_card_num>/<port_num>
no shutdown
pvc vpi <vpi_num> vci <aal5_vci_num> type aal5
no shutdown
bind link ss7-routing-domain <ss7rd_id> linkset-id <linkset_id> link-id <link_id>
exit
pvc vpi <vpi_num> vci <aal2_vci_num> type aal2 cps-payload-size <cps_paylod_size>
no shutdown
bind alcap-service <alcap_svc_name> context <alcap_ctxt_name> aal2-node
<aal2_node_name> aal2-path <aal2_path_id>
end
Notes:
 <
alcap_ctxt_name
 <
alcap_svc_name
ATM between HNB-GW and CS core network.
 <
aal2_node_name
 <
aal2_path_id

Associating ALCAP Service with HNB-CS Network Service

To associate a pre-configured ALCAP service with HNB-CS Network Service for IuCS-over-ATM function, apply the
following example configuration:
configure
cs-network <cs_network_name>
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
88
> is name of the context in which ALCAP service is configured.
> is name of the ALCAP service which is to be configured for IuCS-over-ATM between
> is a pre-configured SS7 routing domain instance.
> is address of the ALCAP node in SS7 point code notation.
> is name of the context in which ALCAP service is configured.
> is name of the pre-configured ALCAP service which is bound to ATM port for IuCS-over-
> is a pre-configured AAL2 node in ALCAP Service Configuration mode.
> is a pre-configured identifier for AAL2 path in AAL2 Node Configuration mode.
HNB-GW Service Configuration Procedures
OL-25069-03