Monitoring The Service - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

Chapter 4

Monitoring the Service

This chapter provides information for monitoring service status and performance using the show commands found in
the Command Line Interface (CLI). These command have many related keywords that allow them to provide useful
information on all aspects of the system ranging from current software configuration through call activity and status.
The selection of keywords described in this chapter is intended to provided the most useful and in-depth information for
monitoring the system. For additional information on these and other show command keywords, refer to the Command
Line Interface Reference.
In addition to the CLI, the system supports the sending of Simple Network Management Protocol (SNMP) traps that
indicate status and alarm conditions. Refer to the SNMP MIB Reference Guide for a detailed listing of these traps.
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
OL-25069-03
99