▀ Monitoring System Status and Performance
Monitoring System Status and Performance
This section contains commands used to monitor the status of tasks, managers, applications and other software
components in the system. Output descriptions for most of the commands are located in the Counters and Statistics
Reference.
Table 7. System Status and Performance Monitoring Commands
To do this:
Monitor HNB-GW Service Information
Monitor HNB-GW subscribers by call identifier
Monitor HNB-GW subscribers by user name identifier
Monitor HNB-GW subscribers by IMSI value
Monitor HNB-GW subscribers by IP address of UE
Monitoring HNB and UE by Protocol Monitoring
Monitor HNB through Protocol Monitoring
Monitor UE through Protocol Monitoring
View Subscriber Information
Display Session Resource Status
View session resource status
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
100
Enter this command:
monitor subscriber callid call_id
monitor subscriber usernamesubscriber_name
monitor subscriber imsiimsi
monitor subscriber ipaddripv4_address
monitor protocol
Use following protocol options for HNB monitoring:
SCTP
HNBAP
RUA
RADIUS-AUTH
RADIUS-COA
monitor protocol
Use following protocol options for HNB monitoring:
HNBAP
RUA
RANAP
SCCP
ALCAP
AAL2
GTP-U
RTP
show resources session
Monitoring the Service
OL-25069-03