Cable Your Router - NETGEAR JWNR2000Tv3 User Manual

N300 Wireless Router Model JWNR2000Tv3

Cable Your Router

The installation guide that came in the box includes a cabling diagram. This section walks
you through cabling with detailed illustrations.
To connect the router, the computer, and the modem:

1. Unplug and turn off the broadband modem.
2. Locate the cable (A) that connects your computer to the modem. Disconnect the cable at the
modem end only (B). You will connect it to the router later.
Figure 4. Disconnect the modem end of the Ethernet cable
3. Connect the blue Ethernet cable (C) that came with the router to the Internet (WAN) port (D)
on the router, and to the Ethernet port on your broadband modem. The Ethernet cable and
the Internet port label are color coded.
Figure 5. Use the Ethernet cable to connect the modem to the router
A
Internet
B
D
C
Internet
11