Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
5.
Upon receiving the incoming message, your router checks its session table to determine
whether there is an active session for port number 33333. Finding an active session, the
router then modifies the message to restore the original address information that was
replaced by NAT. Your router sends this reply message to your computer, which displays
the web page from www.example.com. The message now contains the following address
and port information:
•
Source address. The IP address of www.example.com.
•
Source port number. 80, which is the standard port number for a web server
process.
•
Destination address. Your computer's IP address.
•
Destination port number. 5678, which is the browser session that made the initial
request.
6.
When you finish your browser session, your router eventually detects a period of inactivity in
the communications. Your router then removes the session information from its session
table, and incoming traffic is no longer accepted on port number 33333.
Port Triggering to Open Incoming Ports
In the preceding example, requests are sent to a remote computer by your router from a
particular service port number. Replies from the remote computer to your router are directed
to that port number. If the remote server sends a reply to a different port number, your router
does not recognize it and discards it. However, some application servers (such as FTP and
IRC servers) send replies to multiple port numbers. Using the port triggering function of your
router, you can tell the router to open additional incoming ports when a particular outgoing
port originates a session.
An example is Internet Relay Chat (IRC). Your computer connects to an IRC server at
destination port 6667. The IRC server not only responds to your originating source port, but
also sends an "identify" message to your computer on port 113. Using port triggering, you can
tell the router, "When you initiate a session with destination port 6667, you must also allow
incoming traffic on port 113 to reach the originating computer." Using steps similar to the
preceding example, the following sequence shows the effects of the port triggering rule that
you defined:
1.
You open an IRC client program to start a chat session on your computer.
2.
Your IRC client composes a request message to an IRC server using a destination port
number of 6667, the standard port number for an IRC server process. Your computer then
sends this request message to your router.
3.
Your router creates an entry in its internal session table describing this communication
session between your computer and the IRC server. Your router stores the original
information, performs Network Address Translation (NAT) on the source address and port,
and sends this request message through the Internet to the IRC server.
4.
Noting your port triggering rule and having observed the destination port number of 6667,
your router creates an additional session entry to send any incoming port 113 traffic to your
computer.
73
Advertisement
Table of Contents
