Cable Your Router - NETGEAR RAX200 User Manual

Nighthawk tri-band ax12 12-stream ax wifi router
Hide thumbs Also See for RAX200:
Table of Contents

Advertisement

-
Aluminum studs
-
Fish tanks
-
Mirrors
-
Brick
-
Concrete
The following factors might limit the range of your WiFi:
• The thickness and number of walls the WiFi signal passes through can limit the range.
• Other WiFi access points in and around your home might affect your router's signal.
WiFi access points are routers, repeaters, WiFi range extenders, and any other
devices that emit a WiFi signal for network access.

Cable your router

Power on your router and connect it to a modem.
Figure 6. Cable your router
To cable your router:
1. Unplug your modem, remove and reinsert the backup battery if it uses one, and
then plug the modem back in.
2. Use the Ethernet cable to connect the modem to the yellow Internet port on the
router.
Note: If your Internet connection does not require a modem, connect your main
Ethernet cable to the yellow Internet port on the router.
Hardware Setup
Nighthawk Tri-Band AX12 12-Stream AX WiFi Router
17
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nighthawk tri-band ax12

Table of Contents