NETGEAR JDGN1000 User Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Wireless Router
  5. JDGN1000
  6. User manual
NETGEAR JDGN1000 User Manual

NETGEAR JDGN1000 User Manual

Hide thumbs Also See for JDGN1000:
  • (2 pages)
    • ,
  • (68 pages)
Table of Contents

Advertisement

Quick Links

Download this manual
NETGEAR JDGN1000
User Manual

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR JDGN1000

Summary of Contents for NETGEAR JDGN1000

  • Page 1 NETGEAR JDGN1000 User Manual...

  • Page 2: Table Of Contents

    NETGEAR JDGN1000 User Manual Contents Safety Precautions ..................2 Overview ......................2 Application ..................2 Features....................2 Standards Compatibility and Compliance ..........2 Hardware Description and Hardware Installation ..........2 Hardware Description................2 3.1.1 Front Panel................2 3.1.2 Rear Panel ................2 Hardware Installation................
  • Page 3 NETGEAR JDGN1000 User Manual 5.5.5 Router Upgrade ................ 2 5.5.6 Logout ..................2 Advanced .................... 2 5.6.1 Wireless Settings ..............2 5.6.2 Wireless Repeating Function ............ 2 5.6.3 Port Forwarding / Port Triggering ..........2 5.6.4 WAN Setup................2 5.6.5 LAN Setup ................

  • Page 4: Safety Precautions

    NETGEAR JDGN1000 User Manual 1 Safety Precautions Read the following information carefully before operating the device. Please follow the following precaution items to protect the device from risks and damage caused by fire and electric power: Use volume labels to mark the type of power.

  • Page 5: Overview

    NETGEAR JDGN1000 User Manual 2 Overview The DSL Router is a highly ADSL2+ Integrated Access Device and can support ADSL link with downstream up to 24 Mbps and upstream up to 1 Mbps. It is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or 802.11g/802.11b/802.11n wireless network.

  • Page 6: Standards Compatibility And Compliance

    NETGEAR JDGN1000 User Manual Several pre-configured popular games. Just enable the game and the port settings are automatically configured. Compatible with all standard Internet applications Industry standard and interoperable DSL interface Simple web-based status page displays a snapshot of system configuration,...
  • Page 7 NETGEAR JDGN1000 User Manual ITU G.992.2 (G.lite) ITU G.994.1 (G.hs) ITU G.992.3 (ADSL2) ITU G.992.5 (ADSL2+) ANSI T1.413 Issue 2 IEEE 802.3 IEEE 802.3u IEEE 802.11b IEEE 802.11g IEEE 802.11n...

  • Page 8: Hardware Description And Hardware Installation

    NETGEAR JDGN1000 User Manual 3 Hardware Description and Hardware Installation 3.1 Hardware Description 3.1.1 Front Panel Figure 1 Front panel The following table describes the indicators on the front panel. Indicator Color Status Description The device is powered on and the device operates normally.

  • Page 9: Rear Panel

    NETGEAR JDGN1000 User Manual Indicator Color Status Description WLAN is enabled. Data is being transmitted through the WLAN Green Blink wireless interface. WLAN is disabled. Connection succeeds under Wi-Fi Protected Setup. Green Negotiation is in progress under Wi-Fi Blink Protected Setup.

  • Page 10: Hardware Installation

    NETGEAR JDGN1000 User Manual Do not press the Reset button unless you want to clear the current settings. The Reset button is in a small circular hole on the rear panel. If you want to restore the default settings, please press the Reset button gently for 1 second with a fine needle inserted into the hole and then release the button.
  • Page 11 NETGEAR JDGN1000 User Manual Figure 3 Connecting the DSL router...

  • Page 12: Pc Network Configuration And Login

    NETGEAR JDGN1000 User Manual 4 PC Network Configuration and Login 4.1 PC Network Configuration Each network interface on the PC should either be configured with a statically defined IP address and DNS address, or be instructed to automatically obtain an IP address using the network DHCP server.
  • Page 13 NETGEAR JDGN1000 User Manual Figure 4 IP and DNS configuration TCP/IP configuration steps for Windows XP are as follows: Step1 Choose Start > Control Panel > Network Connections. Step2 Right-click the Ethernet connection icon and choose Properties. Step3 On the General tab, select the Internet Protocol (TCP/IP) component and click Properties.

  • Page 14: Logging In To The Dsl Router

    NETGEAR JDGN1000 User Manual Step5 Select the Obtain an IP address automatically radio button. Step6 Select the Obtain DNS server address automatically radio button. Step7 Click OK to save the settings. 4.2 Logging In to the DSL Router To log in to the DSL router, do as follows: Step1 Open a Web browser on your computer.

  • Page 15: Web-Based Management

    NETGEAR JDGN1000 User Manual 5 Web-Based Management This chapter describes how to use Web-based management of the DSL router, which allows you to configure and control all of DSL router features and system parameters in a user-friendly GUI. 5.1 Setup Wizard Click Setup Wizard.
  • Page 16 NETGEAR JDGN1000 User Manual For there is no ADSL synchronization, you can also refer to Help on the right to find out the causes in detail and then click Retry. Step3 The following page appears when Internet connection detection is in process.
  • Page 17 NETGEAR JDGN1000 User Manual IPoA connection configuration Figure 11 Step6 If Setup Wizard detects that the internet service provided by your ISP is accessed through PPPoE, the following page appears. Figure 12 PPPoE Detected Click Next to configure your PPPoE connection. Here you can refer to Help on the...
  • Page 18 NETGEAR JDGN1000 User Manual Figure 13 PPPoE Configuration Step7 Click Apply to save the settings. Then IPTV detecting dialog box appears. Figure 14 IPTV detecting dialog box If your ISP provides IPTV service, you can click Next to start IPTV detection.

  • Page 19: Add Wps Client

    NETGEAR JDGN1000 User Manual Figure 17 IPTV Connection Detected Successful It shows Setup Wizard has configured IPTV connection for you. Click Setup to enter Interface Grouping page, click Cancel to complete Setup Wizard configuration. Add WPS Client Click Add WPS Client and the page shown in the following figure appears.

  • Page 20: Setup

    NETGEAR JDGN1000 User Manual Figure 19 Add WPS Client There are 2 primary methods used in the Wi-Fi Protected Setup: - PIN entry, a mandatory method of setup for all WPS certified devices. - Push button configuration (PBC), an actual push button on the hardware or through a simulated push button in the software.
  • Page 21 NETGEAR JDGN1000 User Manual Figure 22 ATM interface configuration In this page, you can set the VPI and VCI values, and select the DSL latency, link type (EoA is for PPPoE, IPoE, and Bridge.), connection mode, encapsulation mode, service category, and IP QoS scheduler algorithm.

  • Page 22: Basic Settings

    NETGEAR JDGN1000 User Manual VCI (Virtual Channel Identifier): The virtual channel between two points in an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known protocols). Select DSL Latency: You may select Path0 and Path1.
  • Page 23 NETGEAR JDGN1000 User Manual Figure 24 WAN service configuration In this page, you are allowed to add, remove, or edit a WAN service. Adding a PPPoE WAN Service This section describes the steps for adding the PPPoE WAN service. Step1 In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page.
  • Page 24 NETGEAR JDGN1000 User Manual Figure 26 WAN service configuration (PPPoE) Step3 In this page, select the WAN service type to be PPP over Ethernet (PPPoE). Click Next to display the following page.
  • Page 25 NETGEAR JDGN1000 User Manual...
  • Page 26 NETGEAR JDGN1000 User Manual Figure 27 PPP username and password (PPPoE) Step4 In this page, you can modify the PPP username, PPP password, PPPoE service name and authentication method. PPP Username: The correct user name provided by your ISP. PPP Password: The correct password provided by your ISP.
  • Page 27 NETGEAR JDGN1000 User Manual Figure 28 Routing-default gateway (PPPoE) Step6 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
  • Page 28 NETGEAR JDGN1000 User Manual Figure 29 DNS server configuration(PPPoE) Step7 In this page, you may obtain the DNS server addresses from the selected WAN interface. Click Next, and the following page appears.
  • Page 29 NETGEAR JDGN1000 User Manual Figure 30 PPPoE summary Step8 In this page, it displays the information about the PPPoE settngs. Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back if necessary.
  • Page 30 NETGEAR JDGN1000 User Manual Figure 32 WAN service interface configuration (IPoE) Step2 Select an ATM Interface, and then click Next to display the following page. Figure 33 WAN service configuration (IPoE) Step3 In this page, select the WAN service type to be IP over Ethernet. After...
  • Page 31 NETGEAR JDGN1000 User Manual Figure 34 WAN IP settings (IPoE) Step4 In this page, you may modify the WAN IP settings. You may select obtain an IP address automatically or manually enter the IP address provided by your ISP. Click Next and the following page appears.
  • Page 32 NETGEAR JDGN1000 User Manual Figure 35 Network address translation settings (IPoE) Step5 In this page, you can set the network address translation settings,for example, enabling NAT, enabling firewall, and enabling IGMP multicast. After finishing setting, click Next and the following page appears.
  • Page 33 NETGEAR JDGN1000 User Manual Figure 36 Routing-default gateway (IPoE) Step6 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
  • Page 34 NETGEAR JDGN1000 User Manual Figure 37 DNS server configuration (IPoE) Step7 In this page, you may obtain the DNS server addresses from the selected WAN interface. If only a PVC with IPoA or static MER protocol is configured, you must enter the static DNS server addresses. After...
  • Page 35 NETGEAR JDGN1000 User Manual Figure 38 IPoE summary Step8 In this page, it displays the information about the IPoE settngs.Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back if necessary.
  • Page 36 NETGEAR JDGN1000 User Manual Figure 40 ATM PVC configuration (PPPoA) Step2 Select the DSL link type to be PPPoA, and select the encapsulation mode to be VC/MUX (according to the uplink equipment). After finishing setting, click the Apply/Save to apply the setings, and the following page...
  • Page 37 NETGEAR JDGN1000 User Manual Figure 41 Adding a DSL ATM interface for PPPoA service Step3 Choose Setup > Basic Settings and click Add to display the following page. Figure 42 WAN service interface configuration (PPPoA) Step4 Select the proper interface for the WAN service, and then click Next to display the following page.
  • Page 38 NETGEAR JDGN1000 User Manual Figure 44 PPP username and password (PPPoA)
  • Page 39 NETGEAR JDGN1000 User Manual PPP Username: The correct user name provided by your ISP. PPP Password: The correct password provided by your ISP. Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO. Enable Fullcone NAT:. NAT is one where all requests from the same internal IP address and port are mapped to the same external IP address and port.
  • Page 40 NETGEAR JDGN1000 User Manual Figure 45 Routing-default gateway (PPPoA) Step7 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
  • Page 41 NETGEAR JDGN1000 User Manual Figure 46 DNS server configuration (PPPoA) Step8 In this page, you can obtain the DNS server addresses from the selected WAN interface. After finishing setting, click Next to display the following page.
  • Page 42 NETGEAR JDGN1000 User Manual Figure 47 PPPoA summary Step9 In this page, it displays the information about the PPPoA settngs.Click Apply/Save to apply the settings, and then the following page appears. You can modify the settings by clicking the Back if necessary.
  • Page 43 NETGEAR JDGN1000 User Manual Figure 49 ATM PVC configuration (IPoA) Step2 Select the DSL link type to be IPoA, and select the encapsulation mode to be LLC/SNAP-ROUTING (according to the uplink equipment). After finishing setting, click the Apply/Save button to display the following...
  • Page 44 NETGEAR JDGN1000 User Manual Figure 50 Adding a DSL ATM interface for IPoA service Step3 Choose Setup > Basic Settings and click Add to display the following page. Figure 51 WAN service interface configuration (IPoA) Step4 Select the proper interface for the WAN service ,and then click Next to display the following page.
  • Page 45 NETGEAR JDGN1000 User Manual Figure 53 WAN IP settings (IPoA) Step6 In this page, enter the WAN IP address, the WAN subnet mask primary DNS server and secondary DNS server and then click Next to display the following page.
  • Page 46 NETGEAR JDGN1000 User Manual Figure 54 Network address translation settings (IPoA) In this page, Network Address Translation (NAT) allows you to share one Wide Area Network (WAN) IP address for multiple computers on your Local Area Network (LAN). If you do not want to enable NAT, and wish the user of modem to access the Internet normally, you need to add a route on the uplink equipment.
  • Page 47 NETGEAR JDGN1000 User Manual Figure 56 DNS server configuration (IPoA) Step9 In this page, you can select DNS server interface from available WAN interfaces. Click Next to display the following page.
  • Page 48 NETGEAR JDGN1000 User Manual Figure 57 IPoA summary Step10 In this page, it displays the information about the IPoA settngs. Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back if necessary.
  • Page 49 NETGEAR JDGN1000 User Manual Figure 59 WAN service interface configuration (bridge) Step2 Select the proper ATM Interface and then click Next to display the following page. Figure 60 WAN service configuration (bridge) Step3 In this page, you can select the WAN service type, click Next to display...

  • Page 50: Interface Grouping

    NETGEAR JDGN1000 User Manual Figure 61 Bridge summary Step4 In this page, it displays the information about the bridge settngs. Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking Back if necessary.
  • Page 51 NETGEAR JDGN1000 User Manual Figure 63 Interface grouping configuration Interface grouping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. To support this feature, you must create mapping groups with the appropriate LAN and WAN interfaces using the Add button.

  • Page 52: Wireless Settings

    NETGEAR JDGN1000 User Manual Figure 64 Adding a new interface group In this page, please follow the configuration steps on the right of the screen to configure the parameters of the interface grouping. After finishing setting, click Apply/Save to save and apply the settings 5.3.4 Wireless Settings...
  • Page 53 NETGEAR JDGN1000 User Manual Figure 65 Wireless Settings Name(SSID): For the security reason, you should change the default SSID to a unique name. Region: Select your region from the drop-down list. This field displays the region of operation for which the wireless interface is intended. It may not be legal to operate the router in a region other than the region shown here.
  • Page 54 NETGEAR JDGN1000 User Manual Channel: You can select auto or 1~11 from the drop-down list If you select as Security Options, the following page appears. Figure 66 Wep Option WEP (Wireless Encryption Protocol) encryption can be enabled for security and privacy.

  • Page 55: Content Filtering

    NETGEAR JDGN1000 User Manual Figure 67 WPA-PSK Option WPA-PSK [TKIP] - Wi-Fi Protected Access with Pre-Shared Key, use WPA-PSK standard encryption with TKIP encryption type WPA2-PSK [AES] - Wi-Fi Protected Access version 2 with Pre-Shared Key, use WPA2-PSK standard encryption with the AES encryption type WPA-PSK [TKIP] + WPA2-PSK [AES] - Allow clients using either WPA-PSK [TKIP] or WPA2-PSK [AES.
  • Page 56 NETGEAR JDGN1000 User Manual Figure 69 System log In this page, you are allowed to view the system log and configure the system log. View System Log Click the View System Log button to display the following page. Figure 70 Viewing the system log In this page, you can view the system log.

  • Page 57: Block Sites

    NETGEAR JDGN1000 User Manual Figure 71 Configuring the system log In this page, you can set 3 types of system log modes, including Local, Remote, and Both. Local: When selecting Local, the events are recorded in the local memory. Remote: When selecting Remote, the events are sent to the specified IP address and UDP port of the remote system log server.
  • Page 58 NETGEAR JDGN1000 User Manual Figure 72 URL filter setup This page is used to prevent the LAN users from accessing some Websites in the WAN. In this page, you may select the Exlude URL list type or the Include URL list type. If you select the Exlude URL list type, it means that the URLs in the list are not accessible.

  • Page 59: Block Services

    NETGEAR JDGN1000 User Manual Figure 74 Completing a URL filter 5.4.3 Block Services When the outgoing IP filtering settings is enabled on the DSL router, the security functions for the local network are enabled at the same time. Choose Content Filtering > Block Services and the following page appears.

  • Page 60: Maintenance

    NETGEAR JDGN1000 User Manual Figure 76 Adding an IP outgoing filtering rule In this page, you can create a filter rule to identify the outgoing IP traffic by specifying a new filter name and at least one condition. Filter Name: Set the filter name.

  • Page 61: Router Status

    NETGEAR JDGN1000 User Manual Figure 77 Submenus of maintenance 5.5.1 Router Status Choose Maintenance > Router Status, and the following page appears.

  • Page 62: Attached Devices

    NETGEAR JDGN1000 User Manual Figure 78 Router Status In this page, you can check the current settings and statistics for your router. This page shows you the current settings. If something needs to be changed, you'll have to change it on the relevant page.

  • Page 63: Set Password

    NETGEAR JDGN1000 User Manual Figure 81 Backup Settings This page allows you to backup, restore and erase the router's current settings. Backup: Specify the path to back up the current configuration in a configuration file on your computer. You can rename the configuration file.

  • Page 64: Router Upgrade

    NETGEAR JDGN1000 User Manual Figure 82 Modifying the password In this page, you can change the password you use to access the Settings pages. 5.5.5 Router Upgrade Choose Management > Router Upgrade and the following page appears. Figure 83 Updating software If you want to upload the software, click the Browse…...

  • Page 65: Advanced

    NETGEAR JDGN1000 User Manual Figure 84 Logout page Click Yes to log out of the configuration page. 5.6 Advanced Choose Advanced and the submenus of Advanced are shown as below: Figure 85 Submenus of advanced 5.6.1 Wireless Settings Choose Advanced > Wireless Settings and the following page appears.
  • Page 66 NETGEAR JDGN1000 User Manual Figure 86 Wireless advanced settings This page allows you to configure the advanced features of the wireless LAN interface. Usually, you do not need to change the settings in this page.
  • Page 67 NETGEAR JDGN1000 User Manual Note: The advanced wireless setting is only for the advanced user. For the common user, do not change any settings in this page. Click Setup MAC Filter to display the following page. Figure 87 MAC filter configuration This page is used to allow or reject the wireless clients to access the wireless network of the wireless router.

  • Page 68: Wireless Repeating Function

    NETGEAR JDGN1000 User Manual Figure 88 Adding a MAC filter In this page, enter the MAC address of the wireless client, and then click the Apply/Save button to add the MAC address to the MAC address list. 5.6.2 Wireless Repeating Function Choose Advanced >...
  • Page 69 NETGEAR JDGN1000 User Manual Figure 90 Port Forwarding/Port Triggering In this page, you can make local computers or servers available to the Internet for different services (for example, FTP or HTTP), to play Internet games (like Quake III), or to use Internet applications (like CUseeMe).
  • Page 70 NETGEAR JDGN1000 User Manual Enter an IP address in the Server IP Address field, to appoint the corresponding PC to receive forwarded packets. The port table displays the ports that you want to open on the device. The Protocol indicates the type of protocol used by each port.
  • Page 71 NETGEAR JDGN1000 User Manual Figure 94 Adding an entry of port triggering Use interface: Select an interface that you want to configure. Select an application: Select a proper application in the drop-down list. Custom application: Manually define an application. Trigger port Start: The start port number that LAN uses to trigger the open port.

  • Page 72: Wan Setup

    NETGEAR JDGN1000 User Manual Note: You can use a single port number, several port numbers separated by commas, port blocks consisting of two port numbers separated by a dash, or any combination of these, for example 80, 90-140, 180. 5.6.4 WAN Setup Choose Advanced >...

  • Page 73: Lan Setup

    NETGEAR JDGN1000 User Manual Respond to Ping on Internet Port If you want the Router to respond to a 'Ping' from the Internet, click this check box. This can be used as a diagnostic tool. Again, like the DMZ server, this can be a security problem.
  • Page 74 NETGEAR JDGN1000 User Manual In this page, you can modify the IP address of the device. The preset IP address is 192.168.1.1. Configuring the DHCP Server Figure 98 Setting the DHCP server If you enable the DHCP sever, the clients will automatically acquire the IP address from the DHCP server.

  • Page 75: Qos Setup

    NETGEAR JDGN1000 User Manual In this page, enter the MAC address of the LAN host and the static IP address that is reserved for the host, and then click the Apply/Save button to apply the settings. 5.6.6 QoS Setup Enabling QoS Choose Advanced >...
  • Page 76 NETGEAR JDGN1000 User Manual Figure 102 Enabling QoS In this page, enable the QoS function and select the default DSCP mark. After finishing setting, click Apply/Save to save and apply the settings. Note: If the Enable Qos checkbox is not selected, all QoS will be disabled for all interfaces.
  • Page 77 NETGEAR JDGN1000 User Manual Figure 103 QoS queue setup In this page, you can enable, add or remove a QoS rule. Note: The lower integer value for precedence indicates the higher priority. Click the Add button to display the following page.

  • Page 78: Dynamic Dns

    NETGEAR JDGN1000 User Manual Click the Add button to display the following page. Figure 106 Adding a QoS classification rule In this page, enter the traffic name, select the rule order and the rule status, and specify the classification criteria and the classification results.
  • Page 79 NETGEAR JDGN1000 User Manual Figure 107 Dynamic DNS Hostname: The hostname of the server. Username: The access username of the DDNS service. Service: The service name of the selected WAN service. Interface: The selected WAN service. Remove: Enable the check-box to select the DDNS service to be removed.

  • Page 80: Static Routes

    NETGEAR JDGN1000 User Manual Click Save/Apply to save and apply the settings. 5.6.8 Static Routes Choose Advanced > Static Routes and the following page appears. Figure 109 Static route setup In this page, you can add or remove a static routing rule of IPV4.

  • Page 81: Upnp

    NETGEAR JDGN1000 User Manual Figure 111 Remote management In this page, you can enable or disable the different types of services. After finishing setting, click the Apply/Save button to save and apply the settings. 5.6.10 UPnP Choose Advanced > UPnP and the following page appears.

Table of Contents