Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
•
Repeater MAC Address (1 through 4). If your router is the base station, it can act as the
"parent" of up to 4 other access points. Enter the MAC addresses of the other access
points in these fields.
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You must know the wireless settings for both units. You must know the MAC
address of the remote unit. First, set up the base station first, and then set up the repeater.
To set up the base station:
1.
Set up both units with the same wireless settings (SSID, mode, channel, and security).
The wireless security option must be set to None or WEP.
2.
Select Advanced > Advanced Setup > Wireless Repeating Function to display the
Wireless Repeating Function screen.
3.
Select the Enable Wireless Repeating Function check box and select the Wireless Base
Station radio button.
4.
Enter the MAC address for one or more repeater units.
5.
Click Apply to save your changes.
70
Advertisement
Table of Contents
