Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
Wireless Repeating Function
Select Advanced > Advanced Setup > Wireless Repeating Function to view or change
wireless repeater settings for the router.
You can configure the following wireless repeater settings:
•
Enable Wireless Repeating Function. Select the check box for the 2.4 GHz or 5 GHz
network to use the wireless repeating function.
•
Wireless MAC of this router. This field displays the MAC address for your router for
your reference. You need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
•
Wireless Repeater. If your router is the repeater, select this check box.
•
Repeater IP Address. If your router is the repeater, enter the IP address of the other
access point.
•
Disable Wireless Client Association. If your router is the repeater, selecting this check
box means that wireless clients cannot associate with it. Only LAN client associations are
allowed.
•
If you are setting up a point-to-point bridge, select the Disable Wireless Client
Association check box.
•
If you want all client traffic to go through the other access point (repeater with wireless
client association), leave the Disable Wireless Client Association check box cleared.
•
Base Station MAC Address. If your router is the repeater, enter the MAC address for the
access point that is the base station.
•
Wireless Base Station. If your router is the base station, select this check box.
•
Disable Wireless Client Association. If your router is the base station, selecting this
check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
69
Advertisement
Table of Contents
