Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
4.
Locate the cable (A) that is still attached to your computer. Insert that cable into a yellow
LAN port on the router, as shown in the following figure:
Figure 6. Connect the Ethernet cable to a LAN port on the router
5.
Connect any additional wired computers to your router by inserting an Ethernet cable from a
computer into one of the three remaining LAN ports.
6.
Start your network in the correct sequence, as described in the following procedure.
CAUTION:
Failure to start or restart your network in the correct sequence could
prevent you from accessing the Internet.
To start your network:
1.
First, plug in and turn on the cable or DSL modem. Wait 2 minutes.
A
Internet
12
Advertisement
Table of Contents
