Cable Your Router - NETGEAR Nighthawk RS700 User Manual

Cable your router

Connect your router to a modem and power on your router.
Figure 5. Cable your router
To cable your router:
1. Unplug your modem, remove and reinsert the backup battery if it uses one, and
then plug the modem back in.
2. Use the Ethernet cable to connect the modem to the yellow Internet port on the
router.
NOTE: If your Internet connection does not require a modem, connect the
Ethernet cable going to your home to the yellow Internet port on the router.
3. Connect the power adapter to your router and plug the power adapter into an outlet.
The router's Power LED lights solid white when the router is ready.
Hardware Setup
Nighthawk WiFi 7 Tri-Band Router Model RS700
23 User Manual