Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
Basic Wireless Settings
The Wireless Settings screen lets you view or configure the wireless network setup.
The JWNR2000Tv3 router comes with preset security. This means that the WiFi network
name (SSID), network key (password), and security option (encryption protocol) are preset in
the factory. You can find the preset SSID and password on the bottom of the unit.
Note:
The preset SSID and password are uniquely generated for every
unit to protect and maximize your wireless security.
If you change your preset security settings, make a note of the new settings and store it in a
safe place where you can easily find it.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the router.
To view or change basic wireless settings:
1.
From the Basic Home screen, select Wireless to display the following screen.
The Wireless Settings screen sections, settings, and procedures are explained in the
following sections.
2.
Make any changes that are needed and click Apply to save your settings.
3.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly.
If they do not, check the following:
•
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
Up to 150Mbps
25
Advertisement
Table of Contents
