Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
•
Does your wireless device or computer show up on the Attached Devices screen? If it
does, then it is connected to the network.
•
If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your router.
Wireless Settings Screen Fields
You can configure the following wireless settings:
•
Region. The location where the router is used. Select from the countries in the drop-down
menu. In the United States, the region is fixed to United States and is not changeable.
•
Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless
stations can see this wireless name (SSID) in their scanned network lists. This check box
is selected by default. To turn off the SSID broadcast, clear the Enable SSID Broadcast
check box and click Apply.
•
Enable Wireless Isolation. If this check box is selected, wireless computers or devices
that join the network can use the Internet but cannot access each other or access
Ethernet devices on the network.
•
Name (SSID). The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is case-sensitive. The default SSID
is randomly generated, and NETGEAR strongly recommends that you do not change
this setting.
•
Channel. This setting is the wireless channel the gateway uses. Enter a value from 1
through 13. (For products in the North America market, only channels 1 through 11 can
be operated.) Do not change the channel unless you experience interference (shown by
lost connections or slow data transfers). If you experience interference, experiment with
different channels to see which is the best.
•
Mode:
-
Up to 54 Mbps. This legacy mode uses a maximum speed of Mbps for b/g
networks.
-
Up to 150 Mbps. (Default) This neighbor-friendly mode does not interfere with
neighboring wireless networks.
-
Up to 300 Mbps. Performance mode uses the maximum wireless-N speed of up
to 300 Mbps.
•
Security Options Settings. The Security Options section of the Wireless Settings screen
lets you change the security option and password. Do not disable security.
26
Advertisement
Table of Contents
