Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the router's DHCP server. Assign
reserved IP addresses to computers or servers that require permanent IP settings.
To reserve an IP address:
1.
Select Advanced > Setup > LAN Setup.
In the Address Reservation section of the screen, click the Add button.
2.
The Address Reservation screen displays.
If the device is in the Address Reservation Table, select its radio button.
3.
The information from the Address Reservation Table populates the IP Address, MAC
Address, and Device Name fields.
If the device is not in the list, click Refresh. If it still does not appear, fill in these fields
manually.
a. In the IP Address field, type the IP address to assign to the computer or server.
(Choose an IP address from the router's LAN subnet, such as 192.168.1.x.)
b. In the MAC Address field, type the MAC Address of the computer or server.
Tip:
If the computer is already on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.
c. In the Device Name field, type the name of the computer or server.
4.
Click Apply to enter the reserved address into the list.
The reserved address is not assigned until the next time the computer contacts the
router's DHCP server. Reboot the computer, or access its IP configuration and force a
DHCP release and renew.
To edit or delete a reserved address entry:
1.
Select Advanced > Setup > LAN Setup to display the LAN Setup screen.
2.
Select the radio button next to the reserved address that you want to edit or delete.
3.
Click Edit or Delete.
43
Advertisement
Table of Contents
