Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
Erase
You can erase the configuration and restore the factory default settings. If you move the
router to a different network or if you forget the password, you might want to restore factory
default settings.
You can use the Reset button on the back of the router (see
you can click the Erase button in this screen.
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168.1.1, and enables the router's DHCP.
Set Password
This feature allows you to change the default password that is used to log in to the router with
the user name admin.
This procedure is not the same as changing the password for wireless access. The label on
the bottom of your router shows your unique wireless network name (SSID) and password for
wireless access (see
To set the password for the user name admin:
1.
Select Advanced > Administration > Set Password to display the following screen:
2.
Type the old password and type the new password twice in the fields on this screen.
3.
Click Apply so that your changes take effect.
Label
on page 7).
Factory Settings
on page 97), or
62
Advertisement
Table of Contents
