Table of Contents
Advertisement
N300 Wireless Router Model JWNR2000Tv3
5.
Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
6.
Type the gateway IP address.
The gateway IP address must be a router on the same LAN segment as the
JWNR2000Tv3 router.
7.
Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if you have a direct connection, set it to 1.
8.
Click Apply to add the static route.
Remote Management
The remote management feature lets you upgrade or check the status of your
JWNR2000Tv3 router over the Internet.
To set up remote management:
1.
Select Advanced > Advanced Setup > Remote Management.
Note:
Be sure to change the router's default login password to a secure
password. The ideal password contains no dictionary words from any language
and contains uppercase and lowercase letters, numbers, and symbols. It can
be up to 30 characters.
83
Advertisement
Table of Contents
