Table of Contents
Advertisement
2.
In the MTU Size field, enter a new size between 64 and 1500.
3.
Click the Apply button.
Your changes are saved.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The router's default LAN IP configuration is:
•
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and should be suitable for most applications. If your network requires a different IP
addressing scheme, you can make the changes in the LAN Setup screen.
Note:
If you change the LAN IP address of the router while connected
through the browser, you will be disconnected. Open a new
connection to the new IP address and log in again.
To change the LAN settings:
1.
Select ADVANCED > Setup > LAN Setup
N600 Wireless Dual Band Router JNDR3000
NETGEAR genie ADVANCED Home
48
Advertisement
Table of Contents
