Lan Ip Setup - NETGEAR DM111P User Manual

LAN IP Setup

If you intend to connect your modem to a router, configure the local area network Internet Protocol
(LAN IP) settings, as follows:
1. Select LAN IP Setup from the main menu to display the following screen:
Figure 1-5
2. Check the LAN IP address of your router, which is usually printed on a label on the bottom or
at the rear of the device.
Note how the address is comprised of four numbers separated by period characters. If
necessary, change the LAN IP address of the modem so that the two left-most numbers of the
address are the same as the two left-most numbers of the router's LAN IP address, and the
third number in the modem's address is different from the third number in the router's address.
For example, if the router's LAN IP address is the same as the modem's default address
(192.168.0.1), change the LAN IP address of the modem to 192.168.1.1.
Tip: If you change the LAN IP address of the modem, write the new address on a
sticky label and attach it to the bottom of the unit. You will need the new
address to access the modem management utility in the future.
Configuring Your Internet Connection
Broadband ADSL2+ Modem User Manual
v1.0, October 2014
1-9