Table of Contents
Advertisement
Router MAC Address. The Ethernet MAC address used by the router on the Internet port.
Some ISPs register the MAC address of the network interface card in your computer when
your account is first opened. They accept traffic only from the MAC address of that computer.
This feature allows your router to use your computer's MAC address (this is also called
cloning).
•
Use Default Address. Use the default MAC address.
•
Use Computer MAC Address. The router captures and uses the MAC address of the
computer that you are now using. You have to use the one computer allowed by the ISP.
•
Use This MAC Address. Enter the MAC address that you want to use.
Basic Wireless Setup
The Wireless Setup screen lets you view or configure the wireless network setup.
The router comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the product label.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
NETGEAR recommends that you do not change your preset security
decide to change your preset security settings, make a note of the new settings and store it in
a safe place where you can easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer
with a wired connection to access the router.
To view or change basic wireless settings:
1.
Select BASIC > Wireless.
N600 Wireless Dual Band Router JNDR3000
NETGEAR genie Basic Settings
29
settings.
If you do
Advertisement
Table of Contents
