Table of Contents
Advertisement
To set up a wireless network with WDS, the following conditions have to be met for both
access points:
•
Both access points have to use the same SSID, wireless channel, and encryption mode.
•
Both access points have to be on the same LAN IP subnet. That is, all the access point
LAN IP addresses are in the same network.
•
All LAN devices (wired and wireless computers) have to be configured to operate in the
same LAN network address range as the access points.
Wireless Repeating Function
The Wireless Repeating Function screen allows you to view or change the wireless repeater
settings for the router.
To view the Wireless Repeating Function screen:
1.
Select ADVANCED > Advanced Setup > Wireless Repeating.
The following settings are available:
•
Enable Wireless Repeating Function. Select the check box for the 2.4 GHz or 5
GHz network to use the wireless repeating function.
N600 Wireless Dual Band Router JNDR3000
Advanced Settings
95
Advertisement
Table of Contents
