NETGEAR N600 JNDR3000 User Manual page 80

- Status. The link status of the port.
- TxPkts. The number of packets transmitted on this port since reset or manual clear.
- RxPkts. The number of packets received on this port since reset or manual clear.
- Collisions. The number of collisions on this port since reset or manual clear.
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN
ports.
- Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.
- Up Time. The time elapsed since this port acquired the link.
- Poll Interval. The interval at which the statistics are updated in this screen.
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
the Set Interval button.
To stop the polling entirely, click the Stop button.
Connection Status Button
You can view the connection status of your router on the Connection Status screen.
To view the Internet connection status:

1. Select ADVANCED Home or select ADVANCED > Administration > Router Status.
2. In the Internet Connection pane, click the Connection Status button.
The Connection Status screen displays:
The following information displays:
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
N600 Wireless Dual Band Router JNDR3000
Administration
80