Table of Contents
Advertisement
4.
Select the Fast Track radio button.
5.
Select the Turn on Fast Track check box.
6.
If the device appears in the MAC Device List, select its radio button.
7.
Select how much of your total bandwidth you want your router to reserve for your device
from the Trusted Device: bandwidth reserved drop-down menu.
8.
Click the Apply button.
By default, the WPS button on your router enables you to connect WPS-capable client
devices to your network. However, you can change the function of the WPS button to function
as a Fast Track button.
Note:
If you use the WPS button as a Fast Track button, you can still use
the NETGEAR genie to add a WPS-capable client to your network.
For more information, see
To change the function of the WPS button:
1.
Select ADVANCED > Setup > QoS Setup.
2.
Select one of the following WPS/Fast Track Push Button Toggle radio buttons:
•
WPS. By default, the WPS radio button is selected. If you want to use the WPS button
on the router as a WPS button, select the WPS radio button.
•
Fast Track. If you want to use the WPS button on your router as a Fast Track button,
select the Fast Track radio button.
3.
Click the Apply button.
QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address:
1.
Select ADVANCED > Setup > QoS Setup.
N600 Wireless Dual Band Router JNDR3000
WPS Wizard
NETGEAR genie ADVANCED Home
55
on page 43.
Advertisement
Table of Contents
