Connect To The Usb Drive From A Remote Computer - NETGEAR N600 JNDR3000 User Manual

The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. To add an approved USB device, select it from the Available USB Devices list.
4. Click the Add button.
5. Select the Allow only approved devices check box.
6. Click the Apply button.
Your changes are saved.
If you want to work with another USB device, click the Safely Remove USB Device button
for the currently connected USB device. Connect the other USB device and repeat this
process.

Connect to the USB Drive from a Remote Computer

To connect to the USB drive from remote computers with a web browser, you have to use the
router's Internet port IP address. If you are using Dynamic DNS, you can type the DNS
name, rather than the IP address. You can view the router's Internet IP address from the
dashboard on the BASIC Home screen or the ADVANCED Home screen.
To connect to the router's USB drive using a web browser:

1. Connect to the router by typing ftp:// and the Internet port IP address in the address
field of Internet Explorer or Netscape Navigator, for example:
ftp://10.1.65.4
If you are using Dynamic DNS, you can type the DNS name rather than the IP address.
N600 Wireless Dual Band Router JNDR3000
USB Storage
67