Table of Contents
Advertisement
The following screen lets you select the method for adding the WPS client (a wireless
device or computer).
3.
Select the radio button for the setup method that you want to use.
•
Push Button. To use the push button method, either click the WPS button on this
screen, or press the WPS button on the side of the router until the LED status
changes. Within two minutes, go to the wireless client and press its WPS button to
join the network without entering a password.
•
PIN Number. To use the PIN method, select the PIN Number radio button, enter the
client security PIN, and click the Next button.
4.
Within two minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
blinks green. When the router establishes a WPS connection, the LED is solid green, and
the router WPS screen displays a confirmation message.
WAN Setup
The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the
maximum transmit unit (MTU) size, and enable the router to respond to a ping on the WAN
(Internet) port.
N600 Wireless Dual Band Router JNDR3000
NETGEAR genie ADVANCED Home
44
on the router
Advertisement
Table of Contents
