Lan Ip Setup - NETGEAR WGR826V User Manual

Hide thumbs Also See for WGR826V:

Table of Contents

The URL to communicate to SASVP can be set by browsing to TA and clinking on "Router upgrade and

Provisiong" link. You should see four sections in the page. In "Automatic Provisioning" , you can modify

the URL for SASVP server . This URL is used to communicate with SASVP server.

"Upload SASVP CA Certificate " section is used to upload CA certificate to TA . This CA certificate is

used by TA for authenticating SASVP server. Have the CA certificate in the local folder of the PC from

where you accessed this page and click on browse button to give the certificate path in your PC and click

on "upload" button.

"Erase Provisioning Authentication Key" section is used to erase authentication key from the TA. This

causes TA to start the communication with SASVP server from the beginning, as if the box is purchased

new. Use this with caution, as this requires setting up new account with VOIP service provider.

"Firmware Upgrade" section is used to upgarde the image on TA, if the image is available on the

harddisk of local PC. The user can download the images out of band to his local PC and use "browse"

button to select the image and upload it to TA.

3.2.13

LAN IP Setup

The DHCP and TCP/IP default values work for most users.

Page 32 of 36

Table of Contents