Table of Contents
Advertisement
The Wireless Setup screen displays:
The screen sections, settings, and procedures are explained in the following sections.
2.
Make any changes that are needed.
3.
Click the Apply button.
Your settings are saved.
4.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly.
If they do not, check the following:
•
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
•
Does your wireless device or computer show up on the Attached Devices screen? If it
does, it is connected to the network.
•
If you are not sure what the SSID or password is, look on the label on your router.
Wireless Setup Screen Fields
The following settings are available on the Wireless Setup screen.
N600 Wireless Dual Band Router JNDR3000
NETGEAR genie Basic Settings
30
Advertisement
Table of Contents
