Table of Contents
Advertisement
The following screen displays:
2.
Select the Turn Remote Management On check box.
3.
Under Allow Remote Access By, specify the external IP addresses allowed to access the
router's remote management.
Note:
For enhanced security, restrict access to as few external IP addresses
as practical.
•
To allow access from a single IP address on the Internet, select Only This
Computer. Enter the IP address that allows access.
•
To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
•
To allow access from any IP address on the Internet, select Everyone.
4.
Specify the port number for accessing the web management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface. Choose
a number between 1024 and 65535, but do not use the number of any common service
port. The default is 8080, which is a common alternate for HTTP.
5.
Click the Apply button.
Your changes are saved.
6.
When accessing your router from the Internet, type your router's WAN IP address into your
browser's address or location field followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number 8080,
enter http://134.177.0.123:8080 in your browser.
N600 Wireless Dual Band Router JNDR3000
Advanced Settings
112
Advertisement
Table of Contents
