Table of Contents
Advertisement
Table 1. Front panel LED descriptions
LED
Description
WPS
•
Solid green. Wireless security is enabled.
•
Blinking green. The router is using WPS to add a wireless device to the network.
•
Off. No WPS connection exists.
USB
•
Solid green. The USB drive is properly mounted.
•
Off. No USB drive is detected. The USB drive is missing or not mounted correctly.
LAN Ports
•
Solid green. The LAN port has detected a 1,000 Mbps link with an attached device.
1–4
•
Solid amber. The LAN port has detected a 10 Mbps link with an attached device.
•
Off. No link is detected on this port.
Internet
•
Solid amber. The IP address was not acquired.
•
Solid green. An IP address was received; the router isready to transmit data.
•
Off. No Ethernet cable is connected between the router and the modem.
5 GHz
•
Solid blue. The wireless radio is operating.
•
Off. The wireless radio is off.
2.4 GHz
•
Solid green. The wireless radio is operating.
•
Off. The wireless radio is off.
Power
•
Solid amber. The unit is starting after being powered on.
•
Solid green. The power is on and the router is ready.
•
Blinking amber. A firmware update is in progress.
•
Blinking green. The firmware is corrupt.
•
Off. Power is not supplied to the router.
N600 Wireless Dual Band Router JNDR3000
Hardware Setup
12
Advertisement
Table of Contents
