And Functions - Mitsubishi VS-55601 Owner's Manual

Remote control buttons and functions (cont.)
(_) select switch
"Your remote control has four layers: the
TV layer, the VCR-A layer, the DVD
layer, and t:he AUDIO layer. You can set
ap each of these layers to operate a
different piece of equipment. Use this
switch to select the layer you want to set
up or use.
(_) power button (POWER)
Press this switch to turn the TV on or off.
(_) number buttons (0-9)
Use to select a channel number or to
enter a parental lock code, OR
to enter zip codes for TV GUIDE Plus+ [
setup.
I
@, channel control (CHANNEL)
Press the top part of the button to change
to a channel with a higher number; press
the bottom part to change to a channel
with a lower number.
_) SuperQuickView
TM
button (SQV)
Press to view channels you have
programmed into SuperQuickView
TM
memory.
_)volume control (VOLUME)
Press the top part of the button to in-
crease the volume. Press the bottom part
of the button to decrease the volume.
input button (INPUT)
Use to select the input source you wish to
watch:
• TV channels on Antenna A or
Antenna B
• Other equipment connected to Input 1,
2 or3.
_QuickView
TM
button (QV)
Press this button to instantly switch to
the channel that you designated as the
QuickView channel. Press again to
return to the last channel viewed.
_TV GUIDE Plus+ (TV GUIDE+)
Use this button to display TV GUIDE
Plus+ program listings.
_> Important:
TV GUIDE Plus+ must be ac,tivated to
operate this button. See the TV GUIDE
Plus+ Operating Guide.
(_) mute control (MUTE)
Use to turn the sound off completely or
to restore it to its original volume.
_) enter/exchange button (ENTER/
EXCH)
Use this button after selecting a channel
number, after selecting an i';em from the
onscreen menu system, or with the
picture-in-picture mode.
information button (INFO)
Use to view an onscreen summary of the
current settings for the TV or AUDIO
functions and the display rc:lated to
Extended Data Services (XI)S).
This button is also used extensively in
the GUIDE Plus+ menu sy,,.tem. See
the TV GUIDE Plus+ Operating Guide.
_)light button
Use to light up the remote (for four
seconds).
(_)adjust buttons ( A, •, _ , b)
After selecting an audio or video func-
tion, use these buttons tc, adjust the
sound or picture. Also u_'_ethese with
the picture-in-picture mode to move the
PIP location on the screen and to select
items in the menus.
ADJUST buttons may be used to scroll
through the channels in GUIDE Plus+
menus.
17