Table of Contents
Advertisement
TV + VCR + cable
with
a cable
box (cont.)
_>Important:
procedure
O
Connect
the cable system's
incoming
cable to the IN terminal
on the two-way
splitter.
O
Connect
a coaxial cable to one of the OUT terminals
on the
splitter;
connect
the other
end of this cable to the ANT-B
terminal
on the back of the TV.
Connect
a second cable to the other OUT terminal
on the
splitter;
connect
the other end of this cable to the IN terminal
on the cable box.
0
Connect
the third coaxial cable to the OUT terminal
on the
back of the cable box; connect
the other end of this cable to the
ANT-A terminal
on the back of the TV.
Connect
the fourth
coaxial cable from the CABLE LOOP-OUT
terminal
on the back of the TV to the ANTENNA
IN terminal
on the back of the VCR.
Connect
an RCA pin-type
video cable from the _rIDEO OUT
terminal
on the back of the VCR to the VIDEO
]INPUT termi-
nal on the back of the TV.
If you are connecting
a Super VHS (S-VHS) VCR, use an S-Video
cable instead
of an RCA pin-type
video cable.
Connect
this S-Video
cable to the S-VIDEO
OUT terminal
on the VCR.
Connect
the
other
end of this cable to the S-VIDEO
INPUT
terminal
on the
back of the TV.
O
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable to connec, t the left (L)
channel.
Connect
the other
ends of this cable to the AUDIO
INPUT
terminals
on the back of the TV.
O
Connect
the IR emitter
cable to the IR/G LINK.
Place one of
the emitter
ends in front of the cable box. Place the other
emitter
end in front of the VCR.
For more detail concerning
the placement
of the emitter
lenses,
see the TV GUIDE
Plus+
Operating
Guide.
Basic Connections
31
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
