Mitsubishi VS-55601 Owner's Manual page 41

Using the remote control to operate VCRs, cable
boxes and other components
about your remote control
This TWs remote control has four "layers": the TV layer, the VCR-
A layer, the DVD layer, and the AUDIO layer. Each layer can be
used to operate a different component in your A!V system. You
choose the layer you want to use by setting the "select" switch
across the top of the remote control.
When you first receive your remote control, the TV layer is set up
to operate your Mitsubishi TV and VCR-A is set up to operate your
Mitsubishi VCR. The DVD layer is programmed to operate your
Mitsubishi DVD player and the AUDIO layer is prcgrammed for
your Mitsubishi A/V receiver.
You can use the following to operate your TV:
• power button
• pause button
• mute control
• SuperQuickView
TM
button
• QuickView
TM
button
• volume control
• input button
• channel control
• enter button
• TV Guide+ button
• audio and video controls
• menu button
• cancel button
• information button
• home button
• sleep timer bul:ton
• number buttons
• PIP controls
• play button
• AV memory button
• arrow buttons
__ [:>Important: The TV GUIDE Plus+ button is functional only after you activate it as described in the TV GUIDE Plus+ Operating Guide.
If you have a cable box (including some digital satellite boxes), a
non-Mitsubishi VCR, or if you have a Mitsubishi laserdisc player,
A/V receiver, or compact disc player, you can set up the layers i_.
the remote control to operate these components.
The VCR-A layer can be set up to operate a non-Mi_:subishi VCR.
The DVD layer can be set to operate a VCR, cable box, digital
satellite box, or a Mitsubishi laserdisc player. The AUDIO layer
can be set up to operate a cable box, digital satellite box, laserdisc
player, or an A/V receiver. The TV layer can be set up to operate
the volume control of a Mitsubishi A_ receiver.
Getting Started 41