Mitsubishi VS-55601 Owner's Manual page 76

Customizing the A/V memory settings (cont.)
Speaker allows you to turn the TV's internal speakers on or off.
• Choose On if you want to play the TV's sour._d through the TV's
built-in speakers.
• Choose Off if you connected your audio system to your TV and
you want to play the sound of your TV through the audio system.
E>Important:
E>Important:
Monitor Out determines how the TV will send a:n audio signal to
an audio system or home theatre receiw_r. Your choices are
"Variable" or "Fixed."
• If you choose Fixed, the TV will send out an audio signal at a
fixed volume level. The level will not change when you adjust
the TV's volume. Use the controls on your audio system to
adjust the volume. The fixed setting is most useihl when you
can control the audio system's volume with a remote control.
• If you choose Variable, the TV's audio output will change when
you adjust the TV's volume. If :you use this setting with an
audio system, turn the TV's volume all the way down, set the
audio system's volume to an average setting and then adjust the
TV's volume until you can hear the signal.
Level Sound allows the TV to automatically equalize the volume
level of programs that contain significant sound level differences
from one segment to another; for example, from regular program-
ming to commercials. To receive the best audic fidelity for music
programs, you may want to turn this setting off.
For proper tone and volume balance, you may wi,_h to turn off the
TV's speakers when using an external audio system.
Set the surround setting to "OFF" when using an A/V receiver with
Dolby_Pro Logic Surround.
"Dolby," "AC-3," "Pro Logic" and the double-D symbol are trademark,,; of
Dolby Laboratories Licensing Corpora_ion. Copyright 1992 Dolby Labora-
tories, Inc. All rights reserved.
76 Chapter 3: Operating Your TV