Mitsubishi VS-55601 Owner's Manual page 22

Overview of the back panel (cont.)
_Important:
_) S-VIDEO input terminal
Use these terminals to connect an S-video signal from a Super
VHS (S-VHS) VCR or disc player to the TV.
If you connect either of the S-Video jacks, you cannot use the
adjacent standard video jack for that same input.
(_) video input terminals
Use these terminals to connect the video output frcm a stan-
dard VCR or other component to the TV.
(_) audio input terminals
Use these terminals to connect the audio output from a VCR or
other component to the TV.
®
IR/G link
Use this terminal to connect an Infrared (IR) EmitLer for TV
GUIDE Plus+ cable box and VCR control features. NOTE: TV
GUIDE Plus+ system can only operate the type ofVCRs and
cable boxes that can select channels using a remote control
with a number keypad.
® active AN Network terminal
Use this terminal to connect a Mitsubishi VCR that has an A/V
network terminal.
(_) video output terminal
Use this terminal to send the TV video signal to a VCR, A/V
receiver or other component.
® audio output terminals
Use these terminals to send the TV's audio signal to a VCR,
A/V receiver, or other component.
Overview of the Back Panel
2:1