Mitsubishi VS-55601 Owner's Manual page 51

Changing channels (cont.)
using the QuickView
TM
option
The QuickView fi_ature can work
in two ways: to reca:L1 the last
channel viewed (Las_ Channel
Recall), or to recaL a channel you
put into QuickView memory.
• If you have not memorized any
channels into QuickView
Memory, Last Channel Recall
allows you to use the QV button
to switch back and forth be-
tween the current channel and
the last one viewed.
QuickView Memory allows
you to use the QV button to
switch back and forth between
the last channel you were
watching and the channel you
put into QuickView memory.
_>Important:
Setting the QuickView memory
O Tune to the channel you wish to memorize.
O Press and hold the QV button for about 2 seconds. The channel
numbers and a QV indicator will appear on the screen, indicat-
ing that you have memorized that channel.
O After changing to another channel, press the QV button to
immediately return to the memorized channel
If you press the QV button while watching the memorized
channel, you will return to the last channel v!_ewed.
The memorized QV channel will remain in memory until you
replace it with a new channel using the procedure above. Once a
channel has been programmed as a QV channel, :you cannot use the
QV button to switch between the current and the last viewed
channel un!ess you re-select the current channel as the QuickView
channel.
Getting Started 51