Mitsubishi VS-55601 Owner's Manual page 46

Using the remote control to operate VCRs, cable
boxes and other components (cont.)
If you are using a Mitsubishi HTS-100 surround sound amplifier,
enter code 30 to use the POWER, VOLUME, and MUTE buttons.
If you are using a Mitsubishi HTS-300 receiver, enter code 31 to
use the POWER, CHANNEL, INPUT, VOLUME, ENTER, number
(0-9), INFO, MENU, CANCEL, AUDIO, VIDEO, ,_DJUST, and
MUTE buttons.
If you are using a Mitsubishi M-VR400 (code 35), M-VR600 (code
35), M-VR800 (code 38), or M-VR1000 (code 38), yc,u can use the
POWER, VOLUME, number (0-9), and MUTE battons to operate
the receiver. The ADJUST buttons will access the M-VR800 a_d
M-VR1000 menus.
If you are using a Mitsubishi M-CD500 CD changer, you can use
the PLAY, PAUSE, STOP, FF, and REW buttons to operate the
changer.
Resetting the layer of your remote to the oril,rinal factory
setting
0
0
0
Set the select switch on the remote to choose Lhe layer you ihave
set the component to.
While holding in the POWER button on the remote control,
enter the code 00.
Release the POWER button.
46 Chapter 3: Operating Your TV