Mitsubishi VS-55601 Owner's Manual page 24

TV + antenna or cable without a cable box
equipment you will need
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called twin
lead or 300 ohm antenna lead), you will need:
One 300-75 ohm matching
transformer
300 ohm - in
75 ohrn- out
connecting a cable
• Connect the incoming cable or antenna to the ANT-A input
terminal on the TV.
300 Ohm Flat
Twin Lead --c
75 Ohm
:P-'- Coaxial Cable
0
0 0 __
F
Optional 300 Ohm to 75 Ohm
Matching Transformer
TV rear terminals
CABLE
ANT-A LOOP-OUT ANT .B
ACTIVE AN IR,'G
NETWORK LINK
® ®
eeTI
connecting an antenna with twin leads
O Use a screwdriver to connect the 300 ohm twin leads to the
transformer.
O Push the 75 ohm side of the transformer onto the/_BqT-A
terminal on the TV.
Basic Connections 23